LTMG New 320HP Bulldozer
The specification of 320HP Bulldozer
| T320 BULLDOZER |
| AWARDED THE ISO9001:2000 SYSTEM CERTIFICATE |
| SPECIFICATION |
| Operating Weight (kg) 34570 |
| Min.Ground Clearance (mm) 500 |
| Min.Turning Radius (m) 3.8 |
| Ground Pressure (MPa) 0.093 |
| Track Gauge (mm) 2140 |
| Max. Pulling Force (KN) 281 |
| Grade Ability (°) 30 |
| |
| TRAVEL SPEED |
| 1st 2nd 3rd |
| Forward (km) 0~3.6 0~6.6 0~11.5 |
| Reverse (km) 0~4.4 0~7.8 0~13.5 |
| ENGINE |
| Model & Type Cummins NTA855-C360S10 6-cylinder, In-line, 4-stroke-cycle,water-cooled ,overhead valve direct injection, turbocharged diesel |
| Rated Revolution (rpm) .............................................................. 2000 |
| Flywheel Horsepower (HP) ...........................................................320 |
| Cylinder Number-BoreX Stroke (mm) ..................... 6-139.7X 152.4 |
| Piston Displacement (L) ....................................................................14 |
| Min. Fuel Consumption (g/kW.h).................................................. 213 |
| Max.Torque (Nm/rpm) ........................................................ 1509/1400 |
| Starting Method........................................Starting motor 24V 11kW |
| |
| |
| POWER TRANSMISSION SYSTEM |
| Torque Converter ............................ 1-stage,1-phase ,3-element, |
| Transmission Planetary gearing, hand-manipulated, hydraulic shift, forced lubrication,3 forward and 3 reverse speeds |
| Bevel Gear.........Spiral bevel gear, splash lubrication, single-stage speed reduction |
| Steering Clutch................................. Wet, multi-disc, spring loaded, hydraulically separated, hydraulic control |
| Steering Brake ...... Wet,floating, direct on-off hydraulic inter-linking operation |
| Final Drive .............Double reduction of spur gear, splash lubrication |
| HYDRAULIC SYSTEM |
| Pump Type............................................ Gear pump 07446-66103 |
| Working Pressure (MPa)...............................................................14 |
| System Discharge (L/min)…..........400(at revolution of 1800rpm) |
| Working Cylinder type...........................Double-acting piston type |
| Working Cylinder Lift Number-BoreXRodXStroke (mm).............. 2-140X75X134 |
| Working Cylinder Tilt BoreXRodXStroke (mm)........225 X90X160 |
| UNDERCARRIAGE SYSTEM |
| Type ................ Swing type of sprayed beam, suspended structure of equalizer bar |
| Carrier Rollers.................................................................. 2(each side) |
| Track Rollers...... 7/each side (5-single flange, 2-double flange) |
| Track Type................. Sealed, assembled single- grouser |
| Number Of Track Shoes......................................... 41(each side) |
| Width Of Track Shoes (mm) ....................................................... 560 |
| Pitch (mm) ................................................................................. 228.6 |
| Length Of Track 0n Ground (mm)..............................................3150 |
| WORK EQUIPMENT |
| Blade type Straight-tilt |
| Blade Capacity (m3) 9.96 |
| Blade Width X Height(mm) 4130 X1553 |
| Max.Lift (mm) 1560 |
| Max.Depth (mm) 560 |
| Max.tilt Adjustment (mm) 1130 |
| Pitch Adjustment ( ° ) 55 |
| Weight Of Blade (kg) 4520 |
| |
| COOLANT AND LUBRICANT CAPACITY |
| Fuel Tank Capacity (L)...............................................600 |
| Hydraulic Tank Capacity (L).......................................164 |
| Engine oil Capacity (L)................................................47 |
| Torque Converter ,Transmission, Bevel Gear., Steering Clutch Capacity (L)...................185 |
| Final Drive Capacity (L) .............................................68(each side) |
Product Features
1. Integral trolley traveling construction adopting rigid chassis and semi-rigid hemger.
2. The advanced control system is equipped to turn around with full hydraulic, with flexible and laborsaving operation.
3. Driver's cab is welded with profile steel, with high strength, resistant against impact and good protection performance.
4. The bulldozer is applicable for construction in narrow ground, which is flexible and high in its operation efficiency.
Shipping&Packing
Our Factory
Customer&Exhibition
After sales service
LTMG always treat after-sale service as important as sale. Nowadays more than 50 agents around the world can supply LTMG professional after-sale service.
All the product of LTMG supplied with one year or 2000 working hours (which occurs first) period quality warranty.
Detail clauses and policies please check our website and product certificate.
FAQ
1.What Certificate do you have?
LTMG workshop meet with the ISO9001:2008 Quality System.
All of our products with CE certificate. Some of our products meets the EPA requirements.
2. Can you customize and design as the clients' requirement?
LTMG will try its best to meet all kinds of clients' special requirements.
However, All the customizing and refit should be implemented safely and scientifically.
The colors can be painted as client's need.
3.How long is the warranty of your products?
Normally 1 year or 2000 working hours whichever occurs first. Details to see the LTMG warranty policy for each model.
4. Can you produce the products labeled with the client's brand?
With the authorization of the brand, we can OEM for our clients.
5. What payment terms do you accept?
Normally 30% T/T in advance as deposit, blance paid before shipment.
100% L/C at sight issued by world famous bank with good faith is also available.
6.Delivery time:
Standard configuration products are always in stock.
The production period of Customizing products is 30 days.
Audited Supplier 
){kind=link}